Other categories :
A custom request?

If you have a special request, a complex project, or would like a specific quote, an updated price, availability or a deadline, please contact us using this form and we'll get back to you as soon as possible.

Breathable air defines air quality that is as close as possible to outdoor air, and corresponds to standard EN 12021. Its main parameters are described by the following values:

  •     Oxygen content: 21% (+/-1%)
  •     CO2 content < 500 ppm
  •     CO content < 5 ppm
  •     Oil vapour content < 0.5 ppm
  •     The air inhaled must be odourless and tasteless.

    The breathing air system must not contain any liquid water. In fact, the dew point must be low enough to avoid any condensation or icing, i.e. -5°C in relation to the lowest temperature. If the lowest temperature is not known, the dew point must remain below -11°C.

Breathing air analysers

Breathable air defines air quality that is as close as possible to outdoor air, and corresponds to standard EN 12021. Its main parameters are described by the following values:

  •     Oxygen content: 21% (+/-1%)
  •     CO2 content < 500 ppm
  •     CO content < 5 ppm
  •     Oil vapour content < 0.5 ppm
  •     The air inhaled must be odourless and tasteless.

    The breathing air system must not contain any liquid water. In fact, the dew point must be low enough to avoid any condensation or icing, i.e. -5°C in relation to the lowest temperature. If the lowest temperature is not known, the dew point must remain below -11°C.

VAR18 breathing air analyzer

VAR18

Breathing air quality testing in compliance with EN 12021

The VAR18 analyser has been designed to monitor the quality of breathing air in compressed air networks.
It is available in a case or cabinet. Measured values comply with standard EN12021.
Features :

  •     Continuous monitoring of the quality of breathing air according to the content of the gases referred to in standard EN 12021,
  •     Ideal for use in industrial and nuclear environments,
  •     Traceability of data, alarms and calibrations over a 10-year period, recoverable on SD card,
  •     3 pre-configured communication ports offer the possibility of dialoguing with different protocols,
  •     4-channel particle measurement option with mass estimation,
  •     Measurement of up to 8 gases or 12 sensors in total.

Special features :

  •     Oil detection threshold 0.01 ppm
  •     Indication in mg/m3
  •     Oil measurement accuracy 5 ppb (0.005 ppm)
  •     Hygrometer withstands 100% RH without destruction

MICROVAR350 breathing air analyzer

MICROVAR350

Tests to EN 12021 standard

The MicroVAR 350 transportable breathing air analyser has been designed to check the quality of breathing air leaving a compressor.
Available in a suitcase, the MicroVAR350 is suitable for one-off measurements during qualification or maintenance work on a breathing air network or as an addition to a BREATHING AIR SKID .

The MicroVAR350 is a reliable product, used on a large number of industrial, nuclear and petrochemical sites.

With its low maintenance costs and ideal size for mobile operations, it can be shipped by courier for weekly calibration by ASCO INSTRUMENTS.

Features :

  •     Continuous monitoring of breathing air quality in accordance with EN 12021.
  •     Integrated LP and HP compressor management program and controls.
  •     Data traceability on SD card (cannot be modified).
  •     Pre-configured communication ports enabling dialogue with various protocols.

Special features :

  •     Oil vapour detection to 0.01 ppm.
  •     Oil measurement accuracy 5 ppb (0.005 ppm).
  •     Hygrometer withstands 100% RH without destruction.

Analyseur MICROVAR350EC

MICROVAR350EC

Contrôles suivant Norme EN 12021

MICROVAR350EC a été conçue pour contrôler la qualité de l'air respirable en sortie de compresseur.
Produit économique, fiable, d'un coût de maintenance réduit.

Fonctionnalités :
  • Contrôle permanent de la qualité de l'air respirable suivant la norme la norme EN 12021.
  • Programme et asservissements de gestion de compresseurs BP et HP intégrés.
  • Traçabilité des données sur carte SD (non modifiable).
  • Ports de communication préconfigurés qui offrent la possibilité de dialoguer avec différents protocoles.
Particularités :
  • Détection de vapeurs d'huile à 0.01 ppm.
  • Précision de la mesure d'huile 5 ppb  (0,005 ppm).
  • Hygromètre supportant 100% HR sans destruction.
Notre engagement qualité

La satisfaction de nos clients
La confidentialité de nos activités
La traçabilité de nos fabrications
Le développement des compétences de nos collaborateurs
Le respect des délais de livraison
La rapidité d'intervention
Des normes et des certifications pour nos machines