Oxygen analysis

O2 trace analyzer case

O2TRACE_VAL

The O2 Trace Balise is designed to measure gaseous oxygen and dissolved oxygen.

For user safety, a CO2 sensor enables ambient CO2 levels to be checked during on-site interventions.

The rugged IP 54 case enables the unit to be used in humid environments.

The unit can be used to measure one of the following parameters:

• 0 - 25% O2.
• 0 - 10,000 ppm O2.

The option of two self-adjusting O2 measurement scales for monitoring oxygen levels over the entire measurement range.

• 0 - 20,000 ppm CO2.
• 0 - 12 Mg O2/liter

A dissolved O2 probe can be connected to this unit.
A PLC with color touchscreen display allows values to be viewed and measurements to be traced in XLS format.
A pump with a flow rate of 0.5 L / min enables measurements within a range of ± 10% of atmospheric pressure.

Oxygen measuring station

O2TRACE_MONO

The Monotrace O2 datalogger is designed to measure O2 in a current loop.

Depending on the O2 sensor used, measurements can be taken in ranges from 
0 and 10,000 ppm. 

Easy to install and use, this control unit is delivered pre-configured for the required application.

The "COM" option enables dialogue with a supervisor or a man/machine interface.

Two integrated thresholds manage local slaving.

An audible alarm draws the user's attention when a threshold is exceeded.

Three programmable function keys simplify operation.

The 5-digit display with minimum and maximum information memorizes peaks.
 

Portable O2 detector

O2TRACE_P

• Oxygen trace detector for inerting.
• Self-contained unit with sampling pump.
• Digital display.
• Zero calibration via function key.
• 2-line monochrome display.
• Possibility of sampling from 60 bar network (option).
• Display of sensor and pump faults.
• Autonomy: 11 hours in continuous mode, 15 hours in standby mode.
• Carrying case included. 
• Supplied with 3 m of food-grade tubing.
• Optional float sampler.
• Cell guaranteed for 1 year.
• Supports 21% O2 at all times.
• Operates on two standard 9-volt batteries.
• Annual calibration.
• Selective for CO2 and alcohol vapors.
• Minimum detection 50 ppm O2.
   

O2 measurement beacon

O2TRACE_B

The O2 Trace Balise is designed to measure gaseous oxygen and dissolved oxygen.

For user safety, a CO2 sensor enables ambient CO2 levels to be checked during on-site interventions.

The rugged IP 54 case enables the unit to be used in humid environments.

Two self-adjusting scales enable oxygen levels to be monitored over the entire measurement range.

• 0 - 25% O2.
• 0 - 10,000 ppm O2.
• 0 - 20,000 ppm CO2.
• 0 - 12 Mg O2 / liter.

A PLC with color touchscreen displays values and allows traceability of measurements in XLS format.

A pump with a flow rate of 0.5 L / min enables measurements within a range of ± 10% of atmospheric pressure.

An additional dissolved O2 oxygen sensor can be connected to this unit.

The built-in battery provides 8 hours' autonomy.
 

Oxygen control unit

O2TRACE_FIXE

The O2 Trace control unit is designed for low-value O2 measurement.

Its sturdy IP66 stainless steel casing makes it ideal for use in the food industry.

A PLC with color touch screen allows traceability of measurements in XLS format.

Depending on the O2 sensor integrated into the unit, measurements can be taken on scales from 0 to 10,000 ppm.

A pump with a flow rate of 0.5 L/min enables measurements from atmospheric pressure.

Easy to install and use, this unit is delivered pre-configured for the required application.

The "COM" option enables dialogue with a supervisor or a man/machine interface.

The two integrated thresholds manage local slaving or N2 regulation.

An audible alarm draws the user's attention when a threshold is exceeded.

Continuous monitoring of sample flow ensures that the system is operating correctly.